Compressed air is one of industry’s most important utilities. Yet, without proper air treatment, your compressed air system cannot deliver its full potential. Virtually all free-air contains water in the form of water vapor. When air is compressed to 100 psi, the water vapor is concentrated to about 8 times the normal amount! Water vapor is not an issue in compressed air until temperatures drops and condenses it into droplets of water. Then, it combines with other contaminants and causes wet air, freeze-ups, leaks, and corrosion. To protect your air system from damage caused by water, you must remove enough water vapor from your compressed air to bring its dew point down to a temperature lower than the compressed air will encounter at any point in the system. To get clean, dry, instrument quality air that means trouble-free operation for your compressed air system, choose an air dryer to fit your needs.
Non-Cycling – RNC Series
- 10-3000 cfm
- Integrated grade B filter
- Cold Coalescing filter option
- Zero-Loss Drain
Energy Saving – RES/RSD Series
- 90-675 CFM (RES)
- 800-3000 CFM (RSD) RSD is available up to 12,500 CFM & modules can be combined for any size dryer
- Integrated grade B filter
- Cold Coalescing filter option
- Zero-Loss Drain
High Temp/ High Pressure – RHT/RHP Series
- 20-125 CFM (RHT) – Perfect for reciprocating compressor applications
- 180°F High Inlet Temperature (RHT)
- 30-300 CFM (RHP)
- 725 PSIG High Pressure (RHP)
- Integrated grade B filter
- Zero-Loss Drain
Desiccant Heatless - DGH Series
- 40–5400 CFM
- Dewpoint down to -100° F
- Mounted Filter Packages
- Small Footprint
- Consistent Dewpoint
- Eliminates any concern with ambient air conditions affecting the operation of the drying process
Desiccant Externally Heated - DHP Series
- 300–4300 CFM (300-3200 CFM)
- Dewpoint down to -40°F
- Mounted Filter Packages
- Energy Management Control Feature
- Critical Use Air Externally heated dryers utilize an external heater to reduce purge air consumption during drying process
- Eliminates any concern with the ambient air conditions affecting the operation of the drying process
Desiccant Externally Heated, Blower Purge – DPB Series
- 500 – 4300 CFM
- Dewpoint down to -40°F
- Mounted Filter Packages
- Energy Management Control Feature
- Critical Use Air Treatment
- Externally heated, blower purge dryers utilize an external heater as well as an external blower for highest reduction in purge air consumption during the drying process
Breathing Air Purifiers: DBS Series
- 15-940 CFM
- Six Stage Filtration Process
- Meets OSHA, CGA< ANSI, & CSA Air Standards
Membrane – MES/MMD Series
- 1.5-138 CFM
- Dewpoint to -40°F
- No power source needed
- Point-of-use installation
- Optional digital purge control
